Perfect as a residential chiller, the CX34 can be “stacked” to create 2,4,or 6 ton systems. The CX34 system can be configured as ductless heat pump chiller with hydronic fan coil units, or can be set up as a small central heat pump chiller system using hydronic air handler units available from various manufacturers. Or use it for floor heating, or any combination of these methods mentioned above.
What is a chiller? There are many misconceptions about chillers – to be clear, the Chiltrix system is an R410a air cooled system and does not consume any water, and does not need a cooling tower. It dehumidifies just like a normal air conditioner and does not add water to the air. It is a hydronic heating and cooling system which means that the outdoor unit connects to the indoor units via insulated hydronic lines (water lines) – this is what defines a “chiller”. In the case of Chiltrix, the unit is a reverse-cycle chiller, meaning that it is a heat pump and can run in either cooling or heating mode as the case may be. All of the refrigeration components such as compressor, evaporator, condenser, expansion valves etc. are located in a self-contained outside unit. The outside unit connects to one or more indoor units by water lines.
CHILTRIX IS DISTRIBUTED IN NORTH AMERICA BY HOTSPOT ENERGY INC.
CX34 Chiller Spec Sheet
CXI Fan Coil Units (Indoor Units) Specs
CXI Chiller Fan Coil Test Data / Sizing Guide
Chiller with Solar Integration Design
Heat Pump Chiller Design Options
Full documents including price list are here.
*SEER 31. Note, there is no official SEER rating for chillers. However, to provide the same cooling for the same amount of total power usage, a central air conditioner system would need a SEER rating of up to 31 or above to exceed the performance of a CX34 ductless system.
Reviews
There are no reviews yet.